Fix Your Pc Kernel Alley

blue with loss of inconvenience, lifetime comparable to INVALID kernel handle is an inconvenience of major Windows 10 in general.


of any of these errors will crash your PC and restart it to avoid any damage. For this reason, it is important to know how many of these errors need to be corrected.


How do I fix the kernel on my computer?

Enable menu for legacy extended launches.
Upgrade and repair your autopilots.
Use the memory and diagnostics of the system file checker.
Update Person PC one.
Scan your PC for viruses.
Check the hard drive for errors.
Run here in Safe PC Mode.
Perform a system restore.


  1. Replace the current
  2. Run
  3. Driver BSOD Troubleshooter

  4. Remove your antivirus software
  5. Run sfc in normal mode – scan
  6. Run DISM
  7. This is

  8. check for problem drives
  9. Replace 10
  10. windows

  11. Perform a clean boot/go to safe mode
  12. Perform a Windows 10 reset
  13. This

  14. test hardware

1. Your Repair Drivers

Recent storage of your drivers is necessary if you want to be sure that your system is safe and error free.

If a certain secure driver is outdated and/or may not be suitable for Windows 10, expect you will no longer be able to detect and use the hardware, which may result in an INVALID_KERNEL_HANDLE BSOD error.

In order to Kernel Alley some of these errors, it is essential to replace the drivers. This can be done simply by visiting your hardware manufacturer’s website and downloading the latest drivers for your hardware.


However, updating drivers can sometimes take time, we have a reliable ally who can help you.

In fact, the use of software for aThe automatic change of drivers does not mean that you are doing the dirty work that for most people brings the desired results, but you can even test, discover and trade your own current pilot position. in a few clicks. In this level, you just have to accept your offer and the game is usually over.


is the positive effect of an inefficient pilot. Whenever this happens, you may need to completely reinstall or replace that part now.


just a case of not easy, we recommend using automatic software for work.

2.Run The BSoD Troubleshooter

  • Open
      Settings app and go to Replacement & Security.
    1. Select Troubleshoot from the dedicated menu on the left.
    2. Select “BS0D” in the appropriate panel and settings, click Run this fix.Subscribe to alt=””%20viewBox=’0%200%20643%20500’%3E%3C/svg%3E”>< /li> on the troubleshooting screen.

    3. Remove AntivirusBasic Software


    Because the path to yours protects everything from malicious clients, it is very important to have antivirus software. While antivirus provides security, it can also cause all sorts of BSoD errors.

    Who are these people getting the INVALID_KERNEL_HANDLE BSoD error, you just need to uninstall almost all third party antivirus packages they have installed.

    Even if you uninstall your antivirus program, your computer will not be damaged. Windows 10 comes with Windows Defender as the default antivirus.

    There is a price tag that mentions that some antivirus plans disappear leaving files and registry files behind when you uninstall them, and it is important to use antivirus software to fix some of these errors. .


    In connection with problematic tutorials on antiviruses, it has been reported that a number of computer programs are causing security problems. Some customers have also mentioned spyware, adware, and adware.

    This is most likely caused by a problem with your antivirus software.We recommend that you switch to another antivirus program that does not have this issue as soon as possible.You


    You will find many safe and, moreover, completely safe antivirus tools that are bug-free and 100% safe. Many good antivirus software providers offer free trials. If so, you don’t know which one to choose, everyone can just try a few of them and see how you like them.

    4. Start Scan

      You Are Sfc

  • search for cmd and press run as administrator to confirm immediate order.
  • Enter the following set, press and type: sfc/scannow 0
  • Just wait for the Finish method to complete (it actually takes some time).
  • If a problem is found, you you should use it regularly.
  • Close
  • command immediately and restart your computer.

    5. Run DISM

    1. Open the flash command only because it is listed in the previous answer.
    2. H Just paste the following tap command, and type: DISM /Cleanup-Picture /on-line/RestoreHealth
    3. While

    4. wait until the scan is complete .
    5. Reboot all computers and try updating.
    1. Insert installed Boost windows into Media.
    2. Open the Instant Administrator command as mentioned in the basic options above.
    3. Command the following instructions press and Enter after each : /on -line dism /cleanup-image /scanhealth dism /on-line /cleanup-image /restorehealthClick Next sort command %3e%3c/svg%3e”>
    4. and also type: DISM /On-line /Cleanup-Picture /RestoreHealth /supply:WIM:X :SourcesInstall. wim:1 /LimitAccess

    5. For a specific change, make an X with the letter la attached to the drive with 10 windows detected.
    6. After
    7. the process is complete, your computer.


      6. Analysis Of A Tiresome Journey


      1. Enter Boot Supervisor (reboot while holding down the Shift key).
      2. Select “Troubleshoot” and “Upper select selection”.
      3. Select “Immediate command ยป in the options set.
      4. type

      5. Then “specific” and clicke Enter on the line each with the view in which to run it: bootrec.exe /rebuildbcd bootrec.exe /fixmbr< / code> bootrec./fixboot< img exe alt=""%20viewBox='0%200%20960%20480'%3E %3C/svg%3E">


      Some customers also suggest that it is important to continue running chkdsk instructions once they are effective. To follow the recommendations, it is important to know the keywords for all the problematic pump metrics.

      In Command Immediate, again, it's best to type the second of all (but be sure to use the letters that match the pesky drive partition on your PC): chkdsk /rc: < code >chkdsk /rd:< /code>

      Note. This is only one instance, so be sure to run the chkdsk command on every hard drive partition you have.

      7. Replace Windows.10

      Keeping your own drivers up to date is critical, but by far more important is that you can easily get the latest Windows updates.


      If you download the latest versions of Windows via Replace, you'll be able to take advantage of the latest protection and detection tools.


      Cr In addition, the patches also contain many fixes for hardware and software related bugs over time.

      How do you fix kernel mode trap error?

      Restart your computer.
      Reinstall your hardware.
      Upgrade Windows
      update faulty drivers.
      Run the built-in Windows 10 memory diagnostic tool.
      Run memtest86+ SFC and CHKDSK.
      Fixed an unexpected trap mode error in kernels in Windows 10.

      And an account

      Since BSoD errors like INVALID_KERNEL_HANDLE are usually caused by PC hardware or software problems sometimes, fixes need to be installed to fix most of these errors.

      8. Clear Real Boot/Go To Safe Mode

      1. Press the Windows key R+ and type Msconfig. Press Enter check or OK.
      2. Select Selective startup and uncheck Load startup items.">
      3. Go to this tab, check companies hiding all bits and Microsoft providers, click Disable All.
      4. Click " Apply" "OK" and. For those who asked to restart the computer, this is not what you get.
      5. Start the supervisor by pressing Ctrl+Shift Esc+.
      6. When the supervisor opens processes, go to the start tab.
      7. Right-click on each entry in the entry and select Disable from the Must menu (you willQuite disable all inputs input) of.

        Fix Your Pc Kernel Alley
    Scroll to top